Thursday , April 27 2017
Home / Tag Archives: fulton

Tag Archives: fulton

Project 47, Chapter 5: Fleetline Body cart

While I focused my efforts on the frame and everything else, the body sat on a wooden frame exposed to the elements. I knew having a mobile body cart was next on the agenda. Of course, I needed to make it myself! Why not? Shouldn’t be too hard. Since I …

Read More »

Project 47, Chapter 4: 4-link’D

Now on to the rear…I removed the stock axle to go with a later year axle that was more highway friendly. At the time, I did not know that have swapped out the 4.11’s for a set of 3.55’s gears. I originally got a 1980s G-Body rear axle but it …

Read More »

Project 47, Chapter 3: Front Independence

I decided to remove the stock front end and install a Mustang II with disc brakes from TCI (Total Cost Involved – Ontario, CA). The reason I went with disc brakes was for two reasons. First, I had an incident with an old ’51 Chevy car I had where I …

Read More »

Project 47, Chapter 2: Off The Frame!

There are various levels of vehicle restoration one could decide on depending on budget, time, and resources. One route is to go stock and restore the vehicle to its original look and function. Another is to put your own touch and create a Kustom, Lowrider, Hot Rod, or Rat Rod. …

Read More »